🔥 Anker

Anker Default Login – Username, Password, and IP Address

Default IP for Anker

192.168.0.1   100%

Pick the correct IP address from the list above, based on your local IP address, and click Admin. You should be redirected to your Wi-Fi router admin interface.

Default Logins for Anker

IP Address:
192.168.0.1
100%
Username:
admin
Password:
admin

Anker Router Login

Follow given instructions to login to your Anker Wi-Fi Router.

🔥 Connect Anker router cable to your Computer or Laptop. Or use your wireless network (needs credentials – username and password).
Tip: Its best for you to use a wired connection when setting up your Anker Wi-Fi router. Because this prevents the risk of suddenly being logged off while saving your Anker router changes.

🔥 Open the web browser (chrome, safari, Bing) of your choice and type IP address of your Anker router in the URL (address bar). You can get your router’s IP address from the back of your Anker router.

🔥Then enter the default username and password – credentials – of your Anker router by accessing the login panel. If you do not know your Anker router’s default username and password, you can try one of the default passwords for Anker routers. Or if you have changed your router default credentials that know how to recover them.

Anker Router Help

If you are unable to login to your Anker router, then it means you are entering the wrong credentials (username and password). Remember while changing your Anker router username and password make a note of both.

🔥 Forgot Login Password? Then try hard resetting your Anker router to its default factory settings. To hard reset your Anker router, press and hold the small button normally found at the back side of your Anker router for around fifteen seconds. This will reset your Anker Wi-Fi router to its default factory settings and will accept the default credentials.

🔥 Is Router Login Page not loading? Confirm that your device (mobile, laptop, PC) is connected to the Wi-Fi. Also check that if the wrong router IP address is set as the default one.

🔥 Sometimes pages have some issues i.e. loading problems or speed. In this situation, probably your network is using a different IP address. If this situation occurs, then check our Anker routers IP address list and find the right address. You can also visit our tutorial on how to find your router’s IP address.

Models Using Anker

Uspeed Dual Band Router 300Mbps admin / admin192.168.0.1
Uspeed Dual Band Router 600Mbps admin / admin192.168.0.1
Popular IP Addresses
Popular IP Misspellings

Write a Comment