Arris Default Login – IP Address, Username and Password
Default IP for Arris
Default Logins for Arris
Arris Router Login Guide
Is your broadband connection is slow-going then usual?
Resetting your router-modem can result and make a big difference in increasing its performance.
Or for any security issue, are you want to change your Arris router password?
To enable or disable network access or to perform any router configuration setup, your Arris router login is a useful asset. Otherwise, you need to access to Arris login gateway.
In this guide, you will teach you how to use the Arris default password and Arris default login.
Requirements:
- Wi-Fi connectivity or Ethernet connection.
- An Arris modem or router.
- Any thin tool like needle, pen, or paperclip to push the reset button.
Enough to change the router settings. The process itself is quite straightforward.
Arris Login Steps
The Arris router web interface is your router’s admin area (router’s control panel). You must first log in to your Arris router, to make any changes to your device settings. The following are easy and straightforward steps for an Arris router login.
1. Connect to the Arris Network
You must stay connected to its router to set up any router. You can reach the setup page of the Arris router either through a Wi-Fi connection or ethernet cable. You can connect the wireless or wired network using your computer or phone.
Use Ethernet cable if you don’t know the Arris router password (which won’t need a password). Or, if you are using a Wi-Fi connection, locate your Wi-Fi key and SSID (network name) and connect that network on your device. You can get these credentials on a sticker located on the side or front of the router.
2. Navigate to your Router IP Address
First, enter the router IP in the address bar of your web browser. There is a possibility of different router IP addresses for different router models. Most of the cases, the router IP is 192.168.1.254 or 192.168.0.1. You can get access to your router administrator settings by copy and paste these links into the address bar.
3. Write the Default Login Information
In the credential filed (username and password), enter the printed values on the router at the bottom or side of your router. If you do not find the credentials on the router, you can find the list of Arris default username and password for different router models below.
Enter Sign In button or click Enter once you enter the correct credentials.
You will be redirected to the router control panel as the Arris login process completes. Enjoy the custom router configuration benefits.
How to Reset Arris Routers?
An Arris router reset has its benefits. But there is one important fact you cannot ignore. When you reset your device, all the changes you made ever will be cleared.
Arris provides two distinct approaches to reset their device settings easily. Both methods are given below with steps.
Reset Button
By using the reset button at the bottom of the device, most Arris routers can be reset. Go through the user manual if you are facing a tough time locating the reset button. The manuals include all details regarding the arris router reset procedures, arris login, including the position of the reset button.
- Find the reset button on your device. You can search online for your router model.
- Press and hold the reset button for a minimum of 30 seconds. You may need a paperclip, pencil, or something fragile. The button is tiny because manufacturers know that button can be pressed mistakenly.
- Wait for some time to finish the reset process.
In any case, this method does not work, then use the next technique for an Arris router reset.
Web Interface
You can also reset your router by using the Arris web interface. But this method is a little more complicated than simply resetting the reset button.
- Enter your router IP into the address bar for login.
- Navigate to the interface labeled Utilities. This may vary based on your router model.
- Reset the device to default settings my go-to factory reset option.
- Wait for some time until the Arris router reset finishes.
Using these methods, you can successfully reset your Arris router. Next Arris login procedure.
Configuring Arris Router
You can make any change you want from the available settings after you logged into the Arris admin interface. Point to be in your mind that not to break the connection while messing with factory settings.
Before resetting your router, we prefer first to note down your router settings so that you can revert your settings.
What if the router stops working after you reset your router?
In case you make a mistake, there is the opportunity that you can reset your router by using the above two approaches. But once you reset your router can not get its previous settings.
If you make any mistake and still have access to the Arris interface, then revert the settings to what you wrote down before.
Conclusion
If you are experiencing slowness in your broadband connection, try to reset your router to its default factory settings. After resetting your router, you can get access to the control panel by using default credentials. Use the Arris web interface to get the admin control panel.
Models Using Arris
Name | Credentials | IP |
---|---|---|
BGW210-700 | – | 192.168.1.254 |
DG3450 | admin / password | 192.168.0.1 |
DG3450A | admin / password | 192.168.0.1 |
DG860P2 | admin / password | 192.168.0.1 |
DG950A | admin / password | 192.168.0.1 |
MG2402G/CT | – | – |
NVG448B | – | – |
NVG448BQ | – | – |
NVG589 | – | 192.168.1.254 |
NVG595 | – | 192.168.7.254 |
NVG599 | – | 192.168.1.254 |
RAC2V1A | – | – |
RAC2V1A (TR4400-AC) | – | – |
SBG10 | admin / password | 192.168.0.1 |
SBG6400 | – | – |
SBG6700-AC | admin / password | 192.168.0.1 |
SBG6700-AC (591330-011-00) | 192.168.0.1 | admin / password |
SBG6700-AC (6482AC)(591330-011-00)–> | admin / password | 192.168.0.1 |
SBG6900-AC | admin / password | 192.168.0.1 |
SBG6950 | – | – |
SBG6950-AC2 | – | – |
SBG7400 | – | – |
SBG7400-AC2 | – | – |
SBG7580-AC | – | – |
SBG8300 | admin / password | – |
SBR-AC1750 | – / password | 192.168.0.1 |
SBR-AC1900P | admin / password | 192.168.0.1 |
SBR-AC3200P | admin / password | 192.168.0.1 |
SURFboard W31 | – | – |
SURFboard W31 (mAX AX11000) | – | – |
TG1672G | admin / password | 192.168.100.1 |
TG1672G6 | admin / password | 192.168.100.1 |
TG1672G v6 | admin / password | 192.168.100.1 |
TG1682G | admin / password | 10.0.0.1 |
TG1682GER 1 | admin / password | 10.0.0.1 |
TG3442 | – | – |
TG3442 (S/CE) | – | – |
TG3452 | – | – |
TG3452A | – | – |
TG3462 | – | – |
TG3462 (S/CE) | – | – |
TG3482ER | – | – |
TG3482ER (XB6) | – | – |
TG3482P2 | – | – |
TG862G | – | – |
TG9442 | – | – |
TG9442 (Touchstone mAX) | – | – |
TM522G | – | – |
Touchstone mAX | – | – |
Touchstone TG3452 | – | – |
Touchstone TG3462 | – | – |
You can also get a list of default credentials from our “default credentials article”.