Comtrend Default Login – IP Address, Username and Password
Default IP for Comtrend
Pick the correct IP Address based on your local IP Address from the above list and click Admin. You should be redirected to your router admin interface.
Comtrend Router Login
If you buy a Comtrend Router and you just want to improve your network security, or you are experiencing some issues, a change to its configuration settings is in order. For these actions, you’ll need to get access to the Comtrend router’s admin panel.
In this easy to follow up guide, we’ll show you how simple it is to do. All you need is:
In this step by step guide, we’ll show you how easy it is to do. For that you need is:
🔎A computer or laptop that has an ethernet port (and an ethernet cable) or Wi-Fi enabled.
🔎An internet browser installed on your computer.
🔎Your Comtrend router.
In the guide, we’ll also tell you how you can set your Comtrend router to its default factory settings, which works for all common router issues.
Before you do buy a new router in frustration or digging for that long-lost manual, try these steps. Almost all Comtrend routers follow the same process to login to the web interface. So, you can follow the provided steps no matter which model you are using.
✅First, make sure that your Comtrend router is connected with your Computer. You can do so by using an ethernet cable or computer’s Wi-Fi network by looking for it among the available networks.
For the Wi-Fi connection, you’ll have to provide your wi-fi credentials. For ethernet connection no credentials are necessary.
✅Once connected, launch any web browser on your computer, like Firefox, Chrome, Opera, etc. Enter the IP address of your router (192.168.1.1) in the web browser to access the setup pages.
The most typical IP address for Comtrend routers is 192.168.1.1. Type it into your web browser address bar and see if it takes you to the login for the setup pages.
If you find any problem, you can try to establish your router’s IP by using ‘ipconfig’ command or by searching for your model on this page.
You should get a login window in your browser.
If none of these work, then maybe there is a problem in your router, a non-standard router configuration, or a non-standard router. In this case contract with Comtrend support representative or follow the instructions below regarding reset of your router.
✅If you’ve changed the default credentials of your router and you know them, then simply put them in the login window and get access, or if you’ve not changed the default credentials then you can get them form the back or side of your router alongside the barcode and model information.
Default Comtrend login details are:
If it does not work, then try a combination of any of the following commonly used credentials.
If nothing works, then you will have to reset your router to its default factory settings.
✅Now you should get access to the setup pages of your Comtrend router. And remember that what settings you configure here may affect your router’s operation.
If you have set your router to its default factory settings, then you should change the admin login credentials to something strong to secure access to your router.
Here are some of the other things you can configure in settings:
🔎Whether you want your router to transmit on 5 or 2.4 GHz network band.
🔎The name and password of your network router.
🔎Whether or not to use WPS security.
You can also change the following settings:
You can run a diagnostic check or troubleshoot under “Diagnostics” in the left-hand menu. Also, make sure that you have written all settings you changed so that you can revert them if something unexpected happens.
However, if something does go wrong, you can set your Comtrend router to its default factory settings and go from there.
If something worst occurs, you can always contact your Comtrend support representative. Check the back of your router for support calls and other information.
Reset Your Comtrend Router to its Default Factory Settings
Find the small reset button at the back of your router.
Use a paperclip, sharpened pencil, or pen to press the reset button. Press the button for at least 15 seconds so that the router can reset nor restart.
Your router’s lights will start blinking. Wait for them to stop blinking or glow steadily as a sign that resetting is completed.
Power on and off the router to make sure it refreshes with the new configuration.
Now you can try your router’s default credentials as it is set to its default factory settings.