🔥Setup All modes of TP-Link Travel Router TL-WR902AC

TP-Link TL-WR902AC modes

How to configure all modes on TP-Link wireless travel router TL-WR902AC

In this article, I will show you how to easily you can configure any mode of your TP-Link wireless travel router TL-WR902AC. TP-Link provides Default Router Mode, Hotspot Mode, Access Point Mode, Range Extender Mode, and Client Mode. Configure your router according to any mode and enjoy it!

First of all, choose an appropriate operation TP-Link wireless travel router mode. The configuration of all modes is explained step by step.

TP-Link wireless travel router modes

First, let’s configure Router Mode

Router Mode

The wired network is only limited to one device to connect at a time, but if you want to share the internet with more wireless devices. Router Mode switch mode is Share ETH and Timeline is 00’30”. This is the default mode of TP-Link wireless travel router TL-WR902AC,


TP-Link wireless travel router modes

On the very first step switch the operation mode to Share ETH. Then use an Ethernet Cable to connect the internet with your router. In the next step power on your router and finally, Connect your device to the router wirelessly to setup.  Go through each infographic for proper understanding.

network name and password

You can get your network name and password from the router’s label. Put your password in the credentials window. If you have changed your router default username and password and don’t know how to recover it then click here. If you have access to your internet, then enjoy it and neglect the below steps. Otherwise, go through the below steps.

connect through web

Open your browser like chrome, yahoo or safari, etc, and go to tplinkwifi.net

TP-Link TL-WR902AC quick setup

Select the second option of Quick Setup and hit next

TP-Link wireless travel router modes quick setup

Select your WAN connection type and choose Auto-Detect or if you don’t know then you can connect with your internet service provide (ISP).

clone MAC address

Then select the option of NO, I do NOT need to clone the MAC address option and press next

TP-Link TL-WR902AC radio band

Select or unselect radio bands and press next

TP-Link TP-Link TL-WR902AC Wifi settings

Next, customize your Wi-Fi settings. In customization, you can change Wireless Network name, Wireless Password, and more advanced Wireless Settings. Click next

Save settings

Confirm the settings by going through all of your steps and click save.

connect TP-Link wireless travel router TL-WR902AC

Connect the new Wifi Network to access the internet

enjoy TP-Link wireless travel router modes

Hotspot Mode Configuration

Know about top trending routers.

Write a Comment