Fiberlogic Default Login – Username, Password, and IP Address
Default IP for Fiberlogic
Pick the correct IP address from the list above, based on your local IP address, and click Admin. You should be redirected to your Wi-Fi router admin interface.
Default Logins for Fiberlogic
Fiberlogic Router Login
Follow the given instructions to login to your Fiberlogic Wi-Fi Router.
🔥 Connect Fiberlogic router cable to your Computer or Laptop. Or use your wireless network (needs credentials – username and password). Tip: It’s best for you to use a wired connection when setting up your Fiberlogic Wi-Fi router. Because this prevents the risk of suddenly being logged off while saving your Fiberlogic router changes.
🔥 Open the web browser (chrome, safari, Bing) of your choice and type the IP address of your Fiberlogic router in the URL (address bar). You can get your router’s IP address from the back of your Fiberlogic router.
🔥Then enter the default username and password – credentials – of your Fiberlogic router by accessing the login panel. If you do not know your Fiberlogic router’s default username and password, you can try one of the default passwords for Fiberlogic routers. Or if you have changed your router default credentials that know how to recover them.
Fiberlogic Router Help
If you are unable to login into your Fiberlogic router, then it means you are entering the wrong credentials (username and password). Remember while changing your Fiberlogic router username and password make a note of both.
🔥 Forgot Login Password? Then try hard resetting your Fiberlogic router to its default factory settings. To hard reset your Fiberlogic router, press and hold the small button normally found at the backside of your Fiberlogic router for around fifteen seconds. This will reset your Billionton Wi-Fi router to its default factory settings and will accept the default credentials.
🔥 Is Router Login Page not loading? Confirm that your device (mobile, laptop, PC) is connected to the Wi-Fi. Also check that if the wrong router IP address is set as the default one.
🔥 Sometimes pages have some issues i.e. loading problems or speed. In this situation, probably your network is using a different IP address. If this situation occurs, then check our Fiberlogic routers IP address list and find the right address. You can also visit our tutorial on how to find your router’s IP address.